Kenmore refrigerator

A refrigerator that’s not cooling is a serious issue, especially when you have groceries and perishable items that need to be kept fresh. One common problem is when the Kenmore refrigerator is not cooling, but the freezer is still cold. This can be frustrating, but before you panic, there are a few things you can do to troubleshoot and fix the problem.

Kenmore refrigerator
Kenmore refrigerator

In this article, we’ll go over some common reasons why your Kenmore refrigerator may not be cooling properly, and what steps you can take to diagnose and fix the issue.

Fix a Kenmore Refrigerator That’s Not Cooling But the Freezer is Cold

Check the Thermostat

The first thing to check when your Kenmore refrigerator is not cooling is the thermostat. Make sure that the temperature setting is lower than the ambient temperature in the room. If the thermostat is set too high, the refrigerator may not be able to cool properly. Also, make sure that the thermostat is not stuck or malfunctioning. If it is, it may need to be replaced.

Clean the Condenser Coils

The condenser coils are responsible for dissipating heat from the refrigerator. If they’re clogged with dust and debris, the refrigerator may not be able to cool properly. To clean the coils, first unplug the refrigerator and locate the coils. They’re usually located at the back of the refrigerator, but they can also be on the bottom or top. Once you’ve located the coils, use a coil brush or vacuum cleaner to remove any dust and debris.

Check the Evaporator Fan

The evaporator fan is responsible for circulating cold air from the freezer into the refrigerator. If it’s not working properly, the refrigerator may not cool. To check the fan, first, open the freezer door and look for the fan. It’s usually located at the back of the freezer. If the fan is not running, it may need to be replaced.

Check the Door Seals

If the door seals on your Kenmore refrigerator are worn or damaged, cold air may be leaking out of the refrigerator, causing it to not cool properly. To check the seals, first, inspect them visually for any signs of damage. Next, close the door on a piece of paper or a dollar bill, and try to pull it out. If you can pull it out easily, the seals may need to be replaced.

Check the Compressor

The compressor is responsible for circulating refrigerant through the system. If it’s faulty, it may not be able to cool the refrigerator properly. To check the compressor, first, unplug the refrigerator and remove the access panel on the back of the unit. Next, locate the compressor and listen for any unusual noises, such as a clicking or buzzing sound. If you hear these sounds, it may indicate that the compressor is faulty and needs to be replaced.

Conclusion

In conclusion, a Kenmore refrigerator that’s not cooling can be a frustrating problem. However, by following the steps outlined in this article, you can troubleshoot and fix the issue. Remember to check the thermostat, clean the condenser coils, check the evaporator fan, inspect the door seals, and check the compressor.

If you’re not comfortable troubleshooting your Kenmore refrigerator yourself, it’s always best to call a professional technician to diagnose and fix the problem. A professional will have the tools and knowledge to properly diagnose and fix the issue, ensuring that your refrigerator is running properly and keeping your food fresh and safe.

In the future, make sure to perform regular maintenance on your Kenmore refrigerator to prevent issues from occurring. This includes cleaning the condenser coils, inspecting the door seals, and checking the thermostat. With proper maintenance, your Kenmore refrigerator should provide years of reliable service.

By Jake Anderson

I’m Jake Anderson who is passionate about technology, reading books, blogging and sports. If you want to read my blog you can read my profile creation blog.

Leave a Reply

Your email address will not be published. Required fields are marked *